Txb 0104 Konverter

$92800

Category:

Description

Txb 0104 Konverter

Sensor Arah Otomatis This 4-bit noninverting translator uses two separate configurable power-supply rails.
The A port is designed to track Vcca. Vcca accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track Vccb. Vccb accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. Vcca should not exceed Vccb.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The TXB0104 is designed so that the OE input circuit is supplied by Vcca.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (Vcca less than equal Vccb);
Vcc Isolation Feature If Either Vcc Input Is at GND, All Outputs Are in the High-Impedance state;
OE Input Circuit Referenced to Vcca;
Low Power Consumption, 5-μA Max Icc;
Ioff Supports Partial-Power-Down Mode Operation;
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II;
ESD Protection Exceeds JESD 22
– A Port :
^ 2500-V Human-Body Model (A114-B)
^ 200-V Machine Model (A115-A)
^ 1500-V Charged-Device Model (C101)
– B Port :
^ +/-15-kV Human-Body Model (A114-B)
^ 200-V Machine Model (A115-A)
^ 1500-V Charged-Device Model (C101)

Reviews

There are no reviews yet.

Be the first to review “Txb 0104 Konverter”

Your email address will not be published. Required fields are marked *